Gree Error Code H6: Indoor Fan Motor Malfunction
Warning: Your Gree air conditioner's indoor fan motor is malfunctioning, causing the system to shut down. It's safe to operate, but needs professional repair.
How to Fix Gree Code H6
- Step 1: Turn off your air conditioner at the thermostat and the circuit breaker.
- Step 2: Clean the indoor unit's air filter and remove any visible dust from the indoor unit's exterior.
- Step 3: Contact a professional HVAC technician for further diagnosis and repair.
How to Reset Gree Code H6
- Turn off the unit using the remote control or wall controller.
- Turn off the circuit breaker for the outdoor and indoor units. Wait 60 seconds.
- Restore power at the breaker.
- Turn the unit on with the remote control. If the error returns, the fault needs professional diagnosis.
What does H6 mean?
The H6 error code on your Gree air conditioner indicates a problem with the indoor fan motor. This motor is responsible for circulating air throughout your home. When it malfunctions, your AC system will display this error and stop working to prevent further damage. This issue is common in Gree units due to dust accumulation, age, or electrical issues.
Affected Models
Replacement Parts
| Part | OEM Number | Est. Cost |
|---|---|---|
| Indoor Fan Motor | Gree 38MFR81-000 | — |
| Motor Relay | Gree 38MFR81-001 | — |
Related Codes on Same Models
| Code | Description | Severity |
|---|---|---|
| E1 | High Pressure Protection | Warning |
| E2 | Anti-Freeze Protection | Warning |
| E3 | Low Pressure Protection | Warning |
| E4 | Compressor Discharge Temp Protection | Warning |
| E5 | Over-Current Protection | Warning |
| E6 | Communication Error Indoor/Outdoor | Warning |
| E7 | Mode Conflict | Warning |
| E8 | Anti-High Temperature Protection | Warning |
| E9 | Cold Air Prevention | Warning |
| F0 | Blower Temp Sensor Malfunction | Warning |