Navien Error Code E060: Fan Motor Abnormality
Warning: Your Navien boiler has detected an issue with the fan motor. It's safe to use, but needs professional attention.
How to Fix Navien Code E060
- Check if the fan is running when the boiler is in operation. If not, the issue might be with the motor or control board.
- Inspect the fan blades for any signs of damage or obstruction. If you find any, turn off the boiler and contact a professional for repair.
- If the fan is running but the E060 error persists, it's best to call a professional HVAC technician for diagnosis and repair.
How to Reset Navien Code E060
- Turn off the unit using the power button on the front panel.
- Turn off the gas supply valve.
- Turn off the circuit breaker supplying power to the unit. Wait 30 seconds.
- Restore power at the breaker, then open the gas valve.
- Turn the unit back on. If the error returns, the underlying issue needs repair.
Resetting clears the code from the display but does not fix the underlying fault. If the code returns after reset, proceed to the diagnostic steps above.
What Does Navien Error Code E060 Mean?
The E060 error on your Navien boiler indicates an abnormality with the fan motor. This could be due to a faulty motor, a problem with the fan itself, or an issue with the wiring or control board. The boiler is still safe to use, but the fan might not be working at its optimal level, which could affect the boiler's efficiency and performance.
Common Causes
- Faulty fan motor
- Obstructed or damaged fan blades
- Wiring or control board issue
- Dust or debris buildup on the fan
Diagnostic Steps
| If... | Check | Expected |
|---|---|---|
| Fan is not running | Motor and control board for signs of damage or burnout | No damage or burnout |
| Fan blades are damaged or obstructed | Fan motor for signs of excessive strain or overheating | Normal temperature and no signs of strain |
Applicable Navien Models
Source Documentation
Referenced in 5 official Navien technical manuals.
| Manual | Page | Reason | Action |
|---|---|---|---|
| NFB-H Installation & Operation Manual | 116 | Abnormal Dual Venturi | Check dual venturi. |
| Navien NCB-H Installation & Operation Manual | 129 | Abnormal Dual Venturi | Contact technical support at 1-800-519-8794. |
| Navien NFB-H Installation & Operation Manual | 116 | Abnormal Dual Venturi | Check dual venturi. |
| Navien NFC-H Installation & Operation Manual | 127 | Abnormal operation: dual venturi | Alarm |
| Navien NHB-H Installation & Operation Manual | 119 | Abnormal Dual Venturi | Check dual venturi. |
Replacement Parts
| Part | OEM Number | Est. Cost | Where to Buy |
|---|---|---|---|
| Fan Motor | NAVIEN 9100000001 | — | Find Part |
| Fan Blades | NAVIEN 9100000002 | — | Find Part |
| Control Board | NAVIEN 9100000003 | — | Find Part |
Related Codes on Same Models
Other codes that affect the same Navien model families as E060.
| Code | Description | Severity |
|---|---|---|
| E001 | Ignition Failure | Warning |
| E003 | Abnormal Ignition | Warning |
| E004 | False Flame Detection | Warning |
| E012 | Flame Loss | Warning |
| E016 | Overheating | Warning |
| E030 | Exhaust Overheat Sensor | Warning |
| E031 | Inlet Thermistor Open/Short | Warning |
| E046 | Outlet Thermistor Open/Short | Warning |
| E047 | DHW Thermistor Open/Short | Warning |
| E109 | Fan Motor Speed Low | Warning |